faae382955
1. 添加pl端vivado工程生成脚本和源码 2. pl端设计删除本项目无关的fifo和valve interfaces模块 3. 系统部署脚本中删除fifo相关内容 4. 删除linux下的fifo驱动 5. 修改与上述内容有关的文档 BREAKING CHANGE: fifo有关功能和寄存器不再有效 Co-authored-by: lyz <1942503466@qq.com>
569 lines
26 KiB
Tcl
569 lines
26 KiB
Tcl
#*****************************************************************************************
|
|
# Vivado (TM) v2022.1 (64-bit)
|
|
#
|
|
# lower_machine.tcl: Tcl script for re-creating project 'lower_machine'
|
|
#
|
|
# Generated by Vivado on Fri Apr 28 09:33:21 PDT 2023
|
|
# IP Build 3524634 on Mon Apr 18 20:55:01 MDT 2022
|
|
#
|
|
# This file contains the Vivado Tcl commands for re-creating the project to the state*
|
|
# when this script was generated. In order to re-create the project, please source this
|
|
# file in the Vivado Tcl Shell.
|
|
#
|
|
# * Note that the runs in the created project will be configured the same way as the
|
|
# original project, however they will not be launched automatically. To regenerate the
|
|
# run results please launch the synthesis/implementation runs as needed.
|
|
#
|
|
#*****************************************************************************************
|
|
# NOTE: In order to use this script for source control purposes, please make sure that the
|
|
# following files are added to the source control system:-
|
|
#
|
|
# 1. This project restoration tcl script (lower_machine.tcl) that was generated.
|
|
#
|
|
# 2. The following source(s) files that were local or imported into the original project.
|
|
# (Please see the '$orig_proj_dir' and '$origin_dir' variable setting below at the start of the script)
|
|
#
|
|
# "$origin_dir/bd/system.tcl"
|
|
#
|
|
# 3. The following remote source files that were added to the original project:-
|
|
#
|
|
# "$origin_dir/cstr/lower_machine.xdc"
|
|
#
|
|
#*****************************************************************************************
|
|
|
|
# Check file required for this script exists
|
|
proc checkRequiredFiles { origin_dir} {
|
|
set status true
|
|
set files [list \
|
|
"[file normalize "$origin_dir/bd/system.tcl"]"\
|
|
]
|
|
foreach ifile $files {
|
|
if { ![file isfile $ifile] } {
|
|
puts " Could not find local file $ifile "
|
|
set status false
|
|
}
|
|
}
|
|
|
|
set files [list \
|
|
"[file normalize "$origin_dir/cstr/lower_machine.xdc"]"\
|
|
]
|
|
foreach ifile $files {
|
|
if { ![file isfile $ifile] } {
|
|
puts " Could not find remote file $ifile "
|
|
set status false
|
|
}
|
|
}
|
|
|
|
set paths [list \
|
|
"[file normalize "$origin_dir/../[file normalize "$origin_dir/ip_repo"]"]"\
|
|
]
|
|
foreach ipath $paths {
|
|
if { ![file isdirectory $ipath] } {
|
|
puts " Could not access $ipath "
|
|
set status false
|
|
}
|
|
}
|
|
|
|
return $status
|
|
}
|
|
# Set the reference directory for source file relative paths (by default the value is script directory path)
|
|
set origin_dir [file dirname [info script]]
|
|
|
|
# Use origin directory path location variable, if specified in the tcl shell
|
|
if { [info exists ::origin_dir_loc] } {
|
|
set origin_dir $::origin_dir_loc
|
|
}
|
|
|
|
# Set the project name
|
|
set _xil_proj_name_ "lower_machine"
|
|
|
|
# Use project name variable, if specified in the tcl shell
|
|
if { [info exists ::user_project_name] } {
|
|
set _xil_proj_name_ $::user_project_name
|
|
}
|
|
|
|
variable script_file
|
|
set script_file "lower_machine.tcl"
|
|
|
|
# Help information for this script
|
|
proc print_help {} {
|
|
variable script_file
|
|
puts "\nDescription:"
|
|
puts "Recreate a Vivado project from this script. The created project will be"
|
|
puts "functionally equivalent to the original project for which this script was"
|
|
puts "generated. The script contains commands for creating a project, filesets,"
|
|
puts "runs, adding/importing sources and setting properties on various objects.\n"
|
|
puts "Syntax:"
|
|
puts "$script_file"
|
|
puts "$script_file -tclargs \[--origin_dir <path>\]"
|
|
puts "$script_file -tclargs \[--project_name <name>\]"
|
|
puts "$script_file -tclargs \[--help\]\n"
|
|
puts "Usage:"
|
|
puts "Name Description"
|
|
puts "-------------------------------------------------------------------------"
|
|
puts "\[--origin_dir <path>\] Determine source file paths wrt this path. Default"
|
|
puts " origin_dir path value is \".\", otherwise, the value"
|
|
puts " that was set with the \"-paths_relative_to\" switch"
|
|
puts " when this script was generated.\n"
|
|
puts "\[--project_name <name>\] Create project with the specified name. Default"
|
|
puts " name is the name of the project from where this"
|
|
puts " script was generated.\n"
|
|
puts "\[--help\] Print help information for this script"
|
|
puts "-------------------------------------------------------------------------\n"
|
|
exit 0
|
|
}
|
|
|
|
if { $::argc > 0 } {
|
|
for {set i 0} {$i < $::argc} {incr i} {
|
|
set option [string trim [lindex $::argv $i]]
|
|
switch -regexp -- $option {
|
|
"--origin_dir" { incr i; set origin_dir [lindex $::argv $i] }
|
|
"--project_name" { incr i; set _xil_proj_name_ [lindex $::argv $i] }
|
|
"--help" { print_help }
|
|
default {
|
|
if { [regexp {^-} $option] } {
|
|
puts "ERROR: Unknown option '$option' specified, please type '$script_file -tclargs --help' for usage info.\n"
|
|
return 1
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
# Set the directory path for the original project from where this script was exported
|
|
set orig_proj_dir "[file normalize "$origin_dir/lower_machine"]"
|
|
|
|
# Check for paths and files needed for project creation
|
|
set validate_required 0
|
|
if { $validate_required } {
|
|
if { [checkRequiredFiles $origin_dir] } {
|
|
puts "Tcl file $script_file is valid. All files required for project creation is accesable. "
|
|
} else {
|
|
puts "Tcl file $script_file is not valid. Not all files required for project creation is accesable. "
|
|
return
|
|
}
|
|
}
|
|
|
|
# Create project
|
|
create_project ${_xil_proj_name_} $origin_dir/${_xil_proj_name_} -part xc7z010clg400-1
|
|
|
|
# Set the directory path for the new project
|
|
set proj_dir [get_property directory [current_project]]
|
|
|
|
# Set project properties
|
|
set obj [current_project]
|
|
set_property -name "default_lib" -value "xil_defaultlib" -objects $obj
|
|
set_property -name "enable_resource_estimation" -value "0" -objects $obj
|
|
set_property -name "enable_vhdl_2008" -value "1" -objects $obj
|
|
set_property -name "ip_cache_permissions" -value "read write" -objects $obj
|
|
set_property -name "ip_output_repo" -value "$proj_dir/${_xil_proj_name_}.cache/ip" -objects $obj
|
|
set_property -name "mem.enable_memory_map_generation" -value "1" -objects $obj
|
|
set_property -name "part" -value "xc7z010clg400-1" -objects $obj
|
|
set_property -name "revised_directory_structure" -value "1" -objects $obj
|
|
set_property -name "sim.central_dir" -value "$proj_dir/${_xil_proj_name_}.ip_user_files" -objects $obj
|
|
set_property -name "sim.ip.auto_export_scripts" -value "1" -objects $obj
|
|
set_property -name "simulator_language" -value "Mixed" -objects $obj
|
|
set_property -name "webtalk.activehdl_export_sim" -value "1" -objects $obj
|
|
set_property -name "webtalk.modelsim_export_sim" -value "1" -objects $obj
|
|
set_property -name "webtalk.questa_export_sim" -value "1" -objects $obj
|
|
set_property -name "webtalk.riviera_export_sim" -value "1" -objects $obj
|
|
set_property -name "webtalk.vcs_export_sim" -value "1" -objects $obj
|
|
set_property -name "webtalk.xcelium_export_sim" -value "1" -objects $obj
|
|
set_property -name "webtalk.xsim_export_sim" -value "1" -objects $obj
|
|
set_property -name "xpm_libraries" -value "XPM_CDC XPM_MEMORY" -objects $obj
|
|
|
|
# Create 'sources_1' fileset (if not found)
|
|
if {[string equal [get_filesets -quiet sources_1] ""]} {
|
|
create_fileset -srcset sources_1
|
|
}
|
|
|
|
# Set IP repository paths
|
|
set obj [get_filesets sources_1]
|
|
if { $obj != {} } {
|
|
set_property "ip_repo_paths" "[file normalize "$origin_dir/ip_repo"]" $obj
|
|
|
|
# Rebuild user ip_repo's index before adding any source files
|
|
update_ip_catalog -rebuild
|
|
}
|
|
|
|
# Create block design
|
|
source $origin_dir/bd/system.tcl
|
|
|
|
# Generate the wrapper
|
|
make_wrapper -files [get_files system.bd] -top -import
|
|
|
|
|
|
# Set 'sources_1' fileset file properties for local files
|
|
set file "system/system.bd"
|
|
set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
|
|
set_property -name "registered_with_manager" -value "1" -objects $file_obj
|
|
|
|
|
|
# Set 'sources_1' fileset properties
|
|
set obj [get_filesets sources_1]
|
|
set_property -name "top" -value "system_wrapper" -objects $obj
|
|
|
|
# Create 'constrs_1' fileset (if not found)
|
|
if {[string equal [get_filesets -quiet constrs_1] ""]} {
|
|
create_fileset -constrset constrs_1
|
|
}
|
|
|
|
# Set 'constrs_1' fileset object
|
|
set obj [get_filesets constrs_1]
|
|
|
|
# Add/Import constrs file and set constrs file properties
|
|
set file "[file normalize "$origin_dir/cstr/lower_machine.xdc"]"
|
|
set file_added [add_files -norecurse -fileset $obj [list $file]]
|
|
set file "$origin_dir/cstr/lower_machine.xdc"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
|
|
set_property -name "file_type" -value "XDC" -objects $file_obj
|
|
|
|
# Set 'constrs_1' fileset properties
|
|
set obj [get_filesets constrs_1]
|
|
set_property -name "target_part" -value "xc7z010clg400-1" -objects $obj
|
|
|
|
# Create 'sim_1' fileset (if not found)
|
|
if {[string equal [get_filesets -quiet sim_1] ""]} {
|
|
create_fileset -simset sim_1
|
|
}
|
|
|
|
# Set 'sim_1' fileset object
|
|
set obj [get_filesets sim_1]
|
|
# Empty (no sources present)
|
|
|
|
# Set 'sim_1' fileset properties
|
|
set obj [get_filesets sim_1]
|
|
set_property -name "incremental" -value "0" -objects $obj
|
|
set_property -name "top" -value "system_wrapper" -objects $obj
|
|
set_property -name "top_lib" -value "xil_defaultlib" -objects $obj
|
|
|
|
# Set 'utils_1' fileset object
|
|
set obj [get_filesets utils_1]
|
|
# Empty (no sources present)
|
|
|
|
# Set 'utils_1' fileset properties
|
|
set obj [get_filesets utils_1]
|
|
|
|
set idrFlowPropertiesConstraints ""
|
|
catch {
|
|
set idrFlowPropertiesConstraints [get_param runs.disableIDRFlowPropertyConstraints]
|
|
set_param runs.disableIDRFlowPropertyConstraints 1
|
|
}
|
|
|
|
# Create 'synth_1' run (if not found)
|
|
if {[string equal [get_runs -quiet synth_1] ""]} {
|
|
create_run -name synth_1 -part xc7z010clg400-1 -flow {Vivado Synthesis 2022} -strategy "Flow_PerfOptimized_high" -report_strategy {No Reports} -constrset constrs_1
|
|
} else {
|
|
set_property strategy "Flow_PerfOptimized_high" [get_runs synth_1]
|
|
set_property flow "Vivado Synthesis 2022" [get_runs synth_1]
|
|
}
|
|
set obj [get_runs synth_1]
|
|
set_property set_report_strategy_name 1 $obj
|
|
set_property report_strategy {Vivado Synthesis Default Reports} $obj
|
|
set_property set_report_strategy_name 0 $obj
|
|
# Create 'synth_1_synth_report_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0] "" ] } {
|
|
create_report_config -report_name synth_1_synth_report_utilization_0 -report_type report_utilization:1.0 -steps synth_design -runs synth_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
set obj [get_runs synth_1]
|
|
set_property -name "part" -value "xc7z010clg400-1" -objects $obj
|
|
set_property -name "strategy" -value "Flow_PerfOptimized_high" -objects $obj
|
|
set_property -name "steps.synth_design.args.directive" -value "PerformanceOptimized" -objects $obj
|
|
set_property -name "steps.synth_design.args.fsm_extraction" -value "one_hot" -objects $obj
|
|
set_property -name "steps.synth_design.args.keep_equivalent_registers" -value "1" -objects $obj
|
|
set_property -name "steps.synth_design.args.resource_sharing" -value "off" -objects $obj
|
|
set_property -name "steps.synth_design.args.no_lc" -value "1" -objects $obj
|
|
set_property -name "steps.synth_design.args.shreg_min_size" -value "5" -objects $obj
|
|
|
|
# set the current synth run
|
|
current_run -synthesis [get_runs synth_1]
|
|
|
|
# Create 'impl_1' run (if not found)
|
|
if {[string equal [get_runs -quiet impl_1] ""]} {
|
|
create_run -name impl_1 -part xc7z010clg400-1 -flow {Vivado Implementation 2022} -strategy "Performance_ExtraTimingOpt" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
|
|
} else {
|
|
set_property strategy "Performance_ExtraTimingOpt" [get_runs impl_1]
|
|
set_property flow "Vivado Implementation 2022" [get_runs impl_1]
|
|
}
|
|
set obj [get_runs impl_1]
|
|
set_property set_report_strategy_name 1 $obj
|
|
set_property report_strategy {Vivado Implementation Default Reports} $obj
|
|
set_property set_report_strategy_name 0 $obj
|
|
# Create 'impl_1_init_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_opt_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_1_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_place_report_io_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0] "" ] } {
|
|
create_report_config -report_name impl_1_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_place_report_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_1_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_place_report_control_sets_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0] "" ] } {
|
|
create_report_config -report_name impl_1_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.verbose" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_place_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_1_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_place_report_incremental_reuse_1' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1] "" ] } {
|
|
create_report_config -report_name impl_1_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_place_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_post_place_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_route_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_route_report_methodology_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_route_report_power_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_route_report_route_status_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_route_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_route_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_route_report_clock_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_route_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_post_route_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_post_route_phys_opt_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_1_post_route_phys_opt_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps post_route_phys_opt_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
set obj [get_runs impl_1]
|
|
set_property -name "part" -value "xc7z010clg400-1" -objects $obj
|
|
set_property -name "strategy" -value "Performance_ExtraTimingOpt" -objects $obj
|
|
set_property -name "steps.place_design.args.directive" -value "ExtraTimingOpt" -objects $obj
|
|
set_property -name "steps.phys_opt_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.route_design.args.directive" -value "NoTimingRelaxation" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
|
|
|
|
# set the current impl run
|
|
current_run -implementation [get_runs impl_1]
|
|
catch {
|
|
if { $idrFlowPropertiesConstraints != {} } {
|
|
set_param runs.disableIDRFlowPropertyConstraints $idrFlowPropertiesConstraints
|
|
}
|
|
}
|
|
|
|
puts "INFO: Project created:${_xil_proj_name_}"
|
|
# Create 'drc_1' gadget (if not found)
|
|
if {[string equal [get_dashboard_gadgets [ list "drc_1" ] ] ""]} {
|
|
create_dashboard_gadget -name {drc_1} -type drc
|
|
}
|
|
set obj [get_dashboard_gadgets [ list "drc_1" ] ]
|
|
set_property -name "reports" -value "impl_1#impl_1_route_report_drc_0" -objects $obj
|
|
|
|
# Create 'methodology_1' gadget (if not found)
|
|
if {[string equal [get_dashboard_gadgets [ list "methodology_1" ] ] ""]} {
|
|
create_dashboard_gadget -name {methodology_1} -type methodology
|
|
}
|
|
set obj [get_dashboard_gadgets [ list "methodology_1" ] ]
|
|
set_property -name "reports" -value "impl_1#impl_1_route_report_methodology_0" -objects $obj
|
|
|
|
# Create 'power_1' gadget (if not found)
|
|
if {[string equal [get_dashboard_gadgets [ list "power_1" ] ] ""]} {
|
|
create_dashboard_gadget -name {power_1} -type power
|
|
}
|
|
set obj [get_dashboard_gadgets [ list "power_1" ] ]
|
|
set_property -name "reports" -value "impl_1#impl_1_route_report_power_0" -objects $obj
|
|
|
|
# Create 'timing_1' gadget (if not found)
|
|
if {[string equal [get_dashboard_gadgets [ list "timing_1" ] ] ""]} {
|
|
create_dashboard_gadget -name {timing_1} -type timing
|
|
}
|
|
set obj [get_dashboard_gadgets [ list "timing_1" ] ]
|
|
set_property -name "reports" -value "impl_1#impl_1_route_report_timing_summary_0" -objects $obj
|
|
|
|
# Create 'utilization_1' gadget (if not found)
|
|
if {[string equal [get_dashboard_gadgets [ list "utilization_1" ] ] ""]} {
|
|
create_dashboard_gadget -name {utilization_1} -type utilization
|
|
}
|
|
set obj [get_dashboard_gadgets [ list "utilization_1" ] ]
|
|
set_property -name "reports" -value "synth_1#synth_1_synth_report_utilization_0" -objects $obj
|
|
set_property -name "run.step" -value "synth_design" -objects $obj
|
|
set_property -name "run.type" -value "synthesis" -objects $obj
|
|
|
|
# Create 'utilization_2' gadget (if not found)
|
|
if {[string equal [get_dashboard_gadgets [ list "utilization_2" ] ] ""]} {
|
|
create_dashboard_gadget -name {utilization_2} -type utilization
|
|
}
|
|
set obj [get_dashboard_gadgets [ list "utilization_2" ] ]
|
|
set_property -name "reports" -value "impl_1#impl_1_place_report_utilization_0" -objects $obj
|
|
|
|
move_dashboard_gadget -name {utilization_1} -row 0 -col 0
|
|
move_dashboard_gadget -name {power_1} -row 1 -col 0
|
|
move_dashboard_gadget -name {drc_1} -row 2 -col 0
|
|
move_dashboard_gadget -name {timing_1} -row 0 -col 1
|
|
move_dashboard_gadget -name {utilization_2} -row 1 -col 1
|
|
move_dashboard_gadget -name {methodology_1} -row 2 -col 1
|