From 60a474910953c8bc165e3bff2b348b5bb86267ea Mon Sep 17 00:00:00 2001
From: lyz <li.zhenye@qq.com>
Date: Fri, 20 Dec 2024 11:32:04 +0800
Subject: [PATCH] first commit

---
 lower_machine.tcl | 606 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 606 insertions(+)
 create mode 100644 lower_machine.tcl

diff --git a/lower_machine.tcl b/lower_machine.tcl
new file mode 100644
index 0000000..5bedd19
--- /dev/null
+++ b/lower_machine.tcl
@@ -0,0 +1,606 @@
+#*****************************************************************************************
+# Vivado (TM) v2022.1 (64-bit)
+#
+# lower_machine.tcl: Tcl script for re-creating project 'lower_machine'
+#
+# Generated by Vivado on Fri Dec 20 11:28:18 CST 2024
+# IP Build 3524634 on Mon Apr 18 20:55:01 MDT 2022
+#
+# This file contains the Vivado Tcl commands for re-creating the project to the state*
+# when this script was generated. In order to re-create the project, please source this
+# file in the Vivado Tcl Shell.
+#
+# * Note that the runs in the created project will be configured the same way as the
+#   original project, however they will not be launched automatically. To regenerate the
+#   run results please launch the synthesis/implementation runs as needed.
+#
+#*****************************************************************************************
+# NOTE: In order to use this script for source control purposes, please make sure that the
+#       following files are added to the source control system:-
+#
+# 1. This project restoration tcl script (lower_machine.tcl) that was generated.
+#
+# 2. The following source(s) files that were local or imported into the original project.
+#    (Please see the '$orig_proj_dir' and '$origin_dir' variable setting below at the start of the script)
+#
+#    "/home/lyz/pl_prj_test_add_polarization/lower_machine/lower_machine.srcs/sources_1/bd/system/system.bd"
+#    "/home/lyz/pl_prj_test_add_polarization/lower_machine/lower_machine.srcs/constrs_1/new/lower_machine.xdc"
+#    "/home/lyz/pl_prj_test_add_polarization/lower_machine/lower_machine.srcs/utils_1/imports/synth_1/system_wrapper.dcp"
+#
+# 3. The following remote source files that were added to the original project:-
+#
+#    "/home/lyz/local/cotton_project/pl_prj/lower_machine/lower_machine.srcs/utils_1/imports/synth_1/system_wrapper.dcp"
+#
+#*****************************************************************************************
+
+# Check file required for this script exists
+proc checkRequiredFiles { origin_dir} {
+  set status true
+  set files [list \
+ "[file normalize "$origin_dir/lower_machine.srcs/sources_1/bd/system/system.bd"]"\
+ "[file normalize "$origin_dir/lower_machine.srcs/constrs_1/new/lower_machine.xdc"]"\
+ "[file normalize "$origin_dir/lower_machine.srcs/utils_1/imports/synth_1/system_wrapper.dcp"]"\
+  ]
+  foreach ifile $files {
+    if { ![file isfile $ifile] } {
+      puts " Could not find local file $ifile "
+      set status false
+    }
+  }
+
+  set files [list \
+ "[file normalize "$origin_dir/../../local/cotton_project/pl_prj/lower_machine/lower_machine.srcs/utils_1/imports/synth_1/system_wrapper.dcp"]"\
+  ]
+  foreach ifile $files {
+    if { ![file isfile $ifile] } {
+      puts " Could not find remote file $ifile "
+      set status false
+    }
+  }
+
+  set paths [list \
+ "[file normalize "$origin_dir/[file normalize "$origin_dir/../ip"]"]"\
+ "[file normalize "$origin_dir/[file normalize "$origin_dir/../../IP_CORE_POLARIZATION"]"]"\
+ "[file normalize "$origin_dir/[file normalize "$origin_dir/../../PloarizationCameraDetection"]"]"\
+ "[file normalize "$origin_dir/[file normalize "$origin_dir/../delay_project"]"]"\
+  ]
+  foreach ipath $paths {
+    if { ![file isdirectory $ipath] } {
+      puts " Could not access $ipath "
+      set status false
+    }
+  }
+
+  return $status
+}
+# Set the reference directory for source file relative paths (by default the value is script directory path)
+set origin_dir "."
+
+# Use origin directory path location variable, if specified in the tcl shell
+if { [info exists ::origin_dir_loc] } {
+  set origin_dir $::origin_dir_loc
+}
+
+# Set the project name
+set _xil_proj_name_ "lower_machine"
+
+# Use project name variable, if specified in the tcl shell
+if { [info exists ::user_project_name] } {
+  set _xil_proj_name_ $::user_project_name
+}
+
+variable script_file
+set script_file "lower_machine.tcl"
+
+# Help information for this script
+proc print_help {} {
+  variable script_file
+  puts "\nDescription:"
+  puts "Recreate a Vivado project from this script. The created project will be"
+  puts "functionally equivalent to the original project for which this script was"
+  puts "generated. The script contains commands for creating a project, filesets,"
+  puts "runs, adding/importing sources and setting properties on various objects.\n"
+  puts "Syntax:"
+  puts "$script_file"
+  puts "$script_file -tclargs \[--origin_dir <path>\]"
+  puts "$script_file -tclargs \[--project_name <name>\]"
+  puts "$script_file -tclargs \[--help\]\n"
+  puts "Usage:"
+  puts "Name                   Description"
+  puts "-------------------------------------------------------------------------"
+  puts "\[--origin_dir <path>\]  Determine source file paths wrt this path. Default"
+  puts "                       origin_dir path value is \".\", otherwise, the value"
+  puts "                       that was set with the \"-paths_relative_to\" switch"
+  puts "                       when this script was generated.\n"
+  puts "\[--project_name <name>\] Create project with the specified name. Default"
+  puts "                       name is the name of the project from where this"
+  puts "                       script was generated.\n"
+  puts "\[--help\]               Print help information for this script"
+  puts "-------------------------------------------------------------------------\n"
+  exit 0
+}
+
+if { $::argc > 0 } {
+  for {set i 0} {$i < $::argc} {incr i} {
+    set option [string trim [lindex $::argv $i]]
+    switch -regexp -- $option {
+      "--origin_dir"   { incr i; set origin_dir [lindex $::argv $i] }
+      "--project_name" { incr i; set _xil_proj_name_ [lindex $::argv $i] }
+      "--help"         { print_help }
+      default {
+        if { [regexp {^-} $option] } {
+          puts "ERROR: Unknown option '$option' specified, please type '$script_file -tclargs --help' for usage info.\n"
+          return 1
+        }
+      }
+    }
+  }
+}
+
+# Set the directory path for the original project from where this script was exported
+set orig_proj_dir "[file normalize "$origin_dir/"]"
+
+# Check for paths and files needed for project creation
+set validate_required 0
+if { $validate_required } {
+  if { [checkRequiredFiles $origin_dir] } {
+    puts "Tcl file $script_file is valid. All files required for project creation is accesable. "
+  } else {
+    puts "Tcl file $script_file is not valid. Not all files required for project creation is accesable. "
+    return
+  }
+}
+
+# Create project
+create_project ${_xil_proj_name_} ./${_xil_proj_name_} -part xc7z100ffg900-2
+
+# Set the directory path for the new project
+set proj_dir [get_property directory [current_project]]
+
+# Set project properties
+set obj [current_project]
+set_property -name "default_lib" -value "xil_defaultlib" -objects $obj
+set_property -name "enable_resource_estimation" -value "0" -objects $obj
+set_property -name "enable_vhdl_2008" -value "1" -objects $obj
+set_property -name "ip_cache_permissions" -value "read write" -objects $obj
+set_property -name "ip_output_repo" -value "$proj_dir/${_xil_proj_name_}.cache/ip" -objects $obj
+set_property -name "mem.enable_memory_map_generation" -value "1" -objects $obj
+set_property -name "part" -value "xc7z100ffg900-2" -objects $obj
+set_property -name "revised_directory_structure" -value "1" -objects $obj
+set_property -name "sim.central_dir" -value "$proj_dir/${_xil_proj_name_}.ip_user_files" -objects $obj
+set_property -name "sim.ip.auto_export_scripts" -value "1" -objects $obj
+set_property -name "simulator_language" -value "Mixed" -objects $obj
+set_property -name "webtalk.activehdl_export_sim" -value "40" -objects $obj
+set_property -name "webtalk.modelsim_export_sim" -value "41" -objects $obj
+set_property -name "webtalk.questa_export_sim" -value "41" -objects $obj
+set_property -name "webtalk.riviera_export_sim" -value "41" -objects $obj
+set_property -name "webtalk.vcs_export_sim" -value "41" -objects $obj
+set_property -name "webtalk.xcelium_export_sim" -value "9" -objects $obj
+set_property -name "webtalk.xsim_export_sim" -value "41" -objects $obj
+set_property -name "xpm_libraries" -value "XPM_CDC XPM_MEMORY" -objects $obj
+
+# Create 'sources_1' fileset (if not found)
+if {[string equal [get_filesets -quiet sources_1] ""]} {
+  create_fileset -srcset sources_1
+}
+
+# Set IP repository paths
+set obj [get_filesets sources_1]
+if { $obj != {} } {
+   set_property "ip_repo_paths" "[file normalize "$origin_dir/../ip"] [file normalize "$origin_dir/../../IP_CORE_POLARIZATION"] [file normalize "$origin_dir/../../PloarizationCameraDetection"] [file normalize "$origin_dir/../delay_project"]" $obj
+
+   # Rebuild user ip_repo's index before adding any source files
+   update_ip_catalog -rebuild
+}
+
+# Set 'sources_1' fileset object
+set obj [get_filesets sources_1]
+# Import local files from the original project
+set files [list \
+ [file normalize "${origin_dir}/lower_machine.srcs/sources_1/bd/system/system.bd" ]\
+]
+set imported_files [import_files -fileset sources_1 $files]
+
+#call make_wrapper to create wrapper files
+if { [get_property IS_LOCKED [ get_files -norecurse system.bd] ] == 1  } {
+  import_files -fileset sources_1 [file normalize "${origin_dir}/lower_machine.gen/sources_1/bd/system/hdl/system_wrapper.v" ]
+} else {
+  set wrapper_path [make_wrapper -fileset sources_1 -files [ get_files -norecurse system.bd] -top]
+  add_files -norecurse -fileset sources_1 $wrapper_path
+}
+
+
+# Set 'sources_1' fileset file properties for remote files
+# None
+
+# Set 'sources_1' fileset file properties for local files
+set file "system/system.bd"
+set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
+set_property -name "registered_with_manager" -value "1" -objects $file_obj
+
+
+# Set 'sources_1' fileset properties
+set obj [get_filesets sources_1]
+set_property -name "top" -value "system_wrapper" -objects $obj
+
+# Create 'constrs_1' fileset (if not found)
+if {[string equal [get_filesets -quiet constrs_1] ""]} {
+  create_fileset -constrset constrs_1
+}
+
+# Set 'constrs_1' fileset object
+set obj [get_filesets constrs_1]
+
+# Add/Import constrs file and set constrs file properties
+set file "[file normalize "$origin_dir/lower_machine.srcs/constrs_1/new/lower_machine.xdc"]"
+set file_imported [import_files -fileset constrs_1 [list $file]]
+set file "new/lower_machine.xdc"
+set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
+set_property -name "file_type" -value "XDC" -objects $file_obj
+
+# Set 'constrs_1' fileset properties
+set obj [get_filesets constrs_1]
+set_property -name "target_constrs_file" -value "[get_files *new/lower_machine.xdc]" -objects $obj
+set_property -name "target_part" -value "xc7z100ffg900-2" -objects $obj
+set_property -name "target_ucf" -value "[get_files *new/lower_machine.xdc]" -objects $obj
+
+# Create 'sim_1' fileset (if not found)
+if {[string equal [get_filesets -quiet sim_1] ""]} {
+  create_fileset -simset sim_1
+}
+
+# Set 'sim_1' fileset object
+set obj [get_filesets sim_1]
+# Empty (no sources present)
+
+# Set 'sim_1' fileset properties
+set obj [get_filesets sim_1]
+set_property -name "top" -value "system_wrapper" -objects $obj
+set_property -name "top_lib" -value "xil_defaultlib" -objects $obj
+
+# Set 'utils_1' fileset object
+set obj [get_filesets utils_1]
+set files [list \
+ [file normalize "${origin_dir}/../../local/cotton_project/pl_prj/lower_machine/lower_machine.srcs/utils_1/imports/synth_1/system_wrapper.dcp"] \
+]
+add_files -norecurse -fileset $obj $files
+
+# Import local files from the original project
+set files [list \
+ [file normalize "${origin_dir}/lower_machine.srcs/utils_1/imports/synth_1/system_wrapper.dcp" ]\
+]
+set imported_files [import_files -fileset utils_1 $files]
+
+# Set 'utils_1' fileset file properties for remote files
+set file "$origin_dir/../../local/cotton_project/pl_prj/lower_machine/lower_machine.srcs/utils_1/imports/synth_1/system_wrapper.dcp"
+set file [file normalize $file]
+set file_obj [get_files -of_objects [get_filesets utils_1] [list "*$file"]]
+set_property -name "netlist_only" -value "0" -objects $file_obj
+
+
+# Set 'utils_1' fileset file properties for local files
+set file "synth_1/system_wrapper.dcp"
+set file_obj [get_files -of_objects [get_filesets utils_1] [list "*$file"]]
+set_property -name "netlist_only" -value "0" -objects $file_obj
+
+
+# Set 'utils_1' fileset properties
+set obj [get_filesets utils_1]
+
+set idrFlowPropertiesConstraints ""
+catch {
+ set idrFlowPropertiesConstraints [get_param runs.disableIDRFlowPropertyConstraints]
+ set_param runs.disableIDRFlowPropertyConstraints 1
+}
+
+# Create 'synth_1' run (if not found)
+if {[string equal [get_runs -quiet synth_1] ""]} {
+    create_run -name synth_1 -part xc7z100ffg900-2 -flow {Vivado Synthesis 2022} -strategy "Vivado Synthesis Defaults" -report_strategy {No Reports} -constrset constrs_1
+} else {
+  set_property strategy "Vivado Synthesis Defaults" [get_runs synth_1]
+  set_property flow "Vivado Synthesis 2022" [get_runs synth_1]
+}
+set obj [get_runs synth_1]
+set_property set_report_strategy_name 1 $obj
+set_property report_strategy {Vivado Synthesis Default Reports} $obj
+set_property set_report_strategy_name 0 $obj
+# Create 'synth_1_synth_report_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0] "" ] } {
+  create_report_config -report_name synth_1_synth_report_utilization_0 -report_type report_utilization:1.0 -steps synth_design -runs synth_1
+}
+set obj [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0]
+if { $obj != "" } {
+
+}
+set obj [get_runs synth_1]
+set_property -name "part" -value "xc7z100ffg900-2" -objects $obj
+set_property -name "incremental_checkpoint" -value "/home/lyz/local/cotton_project/pl_prj/lower_machine/lower_machine.srcs/utils_1/imports/synth_1/system_wrapper.dcp" -objects $obj
+set_property -name "auto_incremental_checkpoint" -value "1" -objects $obj
+set_property -name "auto_incremental_checkpoint.directory" -value "/home/lyz/local/cotton_project/pl_prj/lower_machine/lower_machine.srcs/utils_1/imports/synth_1" -objects $obj
+set_property -name "strategy" -value "Vivado Synthesis Defaults" -objects $obj
+
+# set the current synth run
+current_run -synthesis [get_runs synth_1]
+
+# Create 'impl_1' run (if not found)
+if {[string equal [get_runs -quiet impl_1] ""]} {
+    create_run -name impl_1 -part xc7z100ffg900-2 -flow {Vivado Implementation 2022} -strategy "Vivado Implementation Defaults" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
+} else {
+  set_property strategy "Vivado Implementation Defaults" [get_runs impl_1]
+  set_property flow "Vivado Implementation 2022" [get_runs impl_1]
+}
+set obj [get_runs impl_1]
+set_property set_report_strategy_name 1 $obj
+set_property report_strategy {Vivado Implementation Default Reports} $obj
+set_property set_report_strategy_name 0 $obj
+# Create 'impl_1_init_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.report_unconstrained" -value "1" -objects $obj
+
+}
+# Create 'impl_1_opt_report_drc_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0] "" ] } {
+  create_report_config -report_name impl_1_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.report_unconstrained" -value "1" -objects $obj
+
+}
+# Create 'impl_1_power_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.report_unconstrained" -value "1" -objects $obj
+
+}
+# Create 'impl_1_place_report_io_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_place_report_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_place_report_control_sets_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0]
+if { $obj != "" } {
+set_property -name "options.verbose" -value "1" -objects $obj
+
+}
+# Create 'impl_1_place_report_incremental_reuse_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_place_report_incremental_reuse_1' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1] "" ] } {
+  create_report_config -report_name impl_1_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+
+}
+# Create 'impl_1_place_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.report_unconstrained" -value "1" -objects $obj
+
+}
+# Create 'impl_1_post_place_power_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.report_unconstrained" -value "1" -objects $obj
+
+}
+# Create 'impl_1_phys_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "is_enabled" -value "0" -objects $obj
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.report_unconstrained" -value "1" -objects $obj
+
+}
+# Create 'impl_1_route_report_drc_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_methodology_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_power_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_route_status_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.report_unconstrained" -value "1" -objects $obj
+
+}
+# Create 'impl_1_route_report_incremental_reuse_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_clock_utilization_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0]
+if { $obj != "" } {
+
+}
+# Create 'impl_1_route_report_bus_skew_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0] "" ] } {
+  create_report_config -report_name impl_1_route_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps route_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0]
+if { $obj != "" } {
+set_property -name "options.warn_on_violation" -value "1" -objects $obj
+
+}
+# Create 'impl_1_post_route_phys_opt_report_timing_summary_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0] "" ] } {
+  create_report_config -report_name impl_1_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0]
+if { $obj != "" } {
+set_property -name "options.max_paths" -value "10" -objects $obj
+set_property -name "options.report_unconstrained" -value "1" -objects $obj
+set_property -name "options.warn_on_violation" -value "1" -objects $obj
+
+}
+# Create 'impl_1_post_route_phys_opt_report_bus_skew_0' report (if not found)
+if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0] "" ] } {
+  create_report_config -report_name impl_1_post_route_phys_opt_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps post_route_phys_opt_design -runs impl_1
+}
+set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0]
+if { $obj != "" } {
+set_property -name "options.warn_on_violation" -value "1" -objects $obj
+
+}
+set obj [get_runs impl_1]
+set_property -name "part" -value "xc7z100ffg900-2" -objects $obj
+set_property -name "auto_rqs.directory" -value "/home/lyz/local/cotton_project/pl_prj/lower_machine/lower_machine.srcs/utils_1/imports/impl_1" -objects $obj
+set_property -name "auto_incremental_checkpoint.directory" -value "/home/lyz/local/cotton_project/pl_prj/lower_machine/lower_machine.srcs/utils_1/imports/impl_1" -objects $obj
+set_property -name "strategy" -value "Vivado Implementation Defaults" -objects $obj
+set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
+set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
+
+# set the current impl run
+current_run -implementation [get_runs impl_1]
+catch {
+ if { $idrFlowPropertiesConstraints != {} } {
+   set_param runs.disableIDRFlowPropertyConstraints $idrFlowPropertiesConstraints
+ }
+}
+
+puts "INFO: Project created:${_xil_proj_name_}"
+# Create 'drc_1' gadget (if not found)
+if {[string equal [get_dashboard_gadgets  [ list "drc_1" ] ] ""]} {
+create_dashboard_gadget -name {drc_1} -type drc
+}
+set obj [get_dashboard_gadgets [ list "drc_1" ] ]
+set_property -name "reports" -value "impl_1#impl_1_route_report_drc_0" -objects $obj
+
+# Create 'methodology_1' gadget (if not found)
+if {[string equal [get_dashboard_gadgets  [ list "methodology_1" ] ] ""]} {
+create_dashboard_gadget -name {methodology_1} -type methodology
+}
+set obj [get_dashboard_gadgets [ list "methodology_1" ] ]
+set_property -name "reports" -value "impl_1#impl_1_route_report_methodology_0" -objects $obj
+
+# Create 'power_1' gadget (if not found)
+if {[string equal [get_dashboard_gadgets  [ list "power_1" ] ] ""]} {
+create_dashboard_gadget -name {power_1} -type power
+}
+set obj [get_dashboard_gadgets [ list "power_1" ] ]
+set_property -name "reports" -value "impl_1#impl_1_route_report_power_0" -objects $obj
+
+# Create 'timing_1' gadget (if not found)
+if {[string equal [get_dashboard_gadgets  [ list "timing_1" ] ] ""]} {
+create_dashboard_gadget -name {timing_1} -type timing
+}
+set obj [get_dashboard_gadgets [ list "timing_1" ] ]
+set_property -name "reports" -value "impl_1#impl_1_route_report_timing_summary_0" -objects $obj
+
+# Create 'utilization_1' gadget (if not found)
+if {[string equal [get_dashboard_gadgets  [ list "utilization_1" ] ] ""]} {
+create_dashboard_gadget -name {utilization_1} -type utilization
+}
+set obj [get_dashboard_gadgets [ list "utilization_1" ] ]
+set_property -name "reports" -value "synth_1#synth_1_synth_report_utilization_0" -objects $obj
+set_property -name "run.step" -value "synth_design" -objects $obj
+set_property -name "run.type" -value "synthesis" -objects $obj
+
+# Create 'utilization_2' gadget (if not found)
+if {[string equal [get_dashboard_gadgets  [ list "utilization_2" ] ] ""]} {
+create_dashboard_gadget -name {utilization_2} -type utilization
+}
+set obj [get_dashboard_gadgets [ list "utilization_2" ] ]
+set_property -name "reports" -value "impl_1#impl_1_place_report_utilization_0" -objects $obj
+
+move_dashboard_gadget -name {utilization_1} -row 0 -col 0
+move_dashboard_gadget -name {power_1} -row 1 -col 0
+move_dashboard_gadget -name {drc_1} -row 2 -col 0
+move_dashboard_gadget -name {timing_1} -row 0 -col 1
+move_dashboard_gadget -name {utilization_2} -row 1 -col 1
+move_dashboard_gadget -name {methodology_1} -row 2 -col 1